Hello,
I recently got my hands on a samsung galaxy J500FN and long story short tried to flash a custom rom onto it using TWRP (and following this guide to the letter -http://ift.tt/1R0Sqkt )
I downloaded the TWRP app on the phone
then i downloaded onto the laptop as recommended in the above guide^ - Samsung Kies, TWRP recovery, Odin, Custom Rom (all downloads from the links in the guide)
so i got through steps 1 to 10 with no problem, its on 11 where i got lost
1. Download the rom and put it on your External SD Card ( make sure you have enough space).
2. Download this TWRP recovery: TWRP recovery by @aapav01 - more info about this recovery at CREDITS
You can also use TWRP 3.0 by Nick Verse which is fully working. Big thanks to him as well. If you didn't know yet, he also made a KERNEL for our J5
3. Download ODIN program. I'm using v3.09
4. Enable the OEM unlock bootloader option at developer options (if you can't see Developer Options, then go to Settings > About phone and tap 7 times build number).
5. Reboot your phone in download mode by keeping pressing Power button + home button + volume DOWN button at same time for few seconds. After an blue screen will appear, press volume up button.
6. Connect your phone with usb cable to your PC.
7. Open ODIN program and an number should appear at ID:COM. If it doesn't, then make sure that the phone usb drivers are installed.
8. Click on AP or PDA ( according to the version of odin which you downloaded) and choose the TWRP recovery you've downloaded and click START. Wait until the process finish.
9. Now go to TWRP recovery by keeping pressing Power button + home button + volume UP button at same time for few seconds.
10. Choose Wipe, then Advanced wipe and choose Dalvik Cache, System, Data and Cache and then Swipe to wipe.
11. Now choose Install and go to the place where you did put the ROM and choose it. Wait till installation finish and DON'T REBOOT YET.
12. Flash GAPPS. I use Open Gapps, ARM 5.1.1 pico version. http://opengapps.org/ . It's XDA thread is HERE .
13. Wipe dalvk cache & cache.
14. Reboot & WAIT 5-10 minutes until it boot!. Only first boot is longer. NOTE: When you reboot, if it ask you for SuperSU choose "do not install".
15. If you followed all the steps carefully, then everything will be OK. Enjoy
When i find the Rom and press the install button on TWRP it just changes from "install zip" to "install image" and i cant go any further.?
please help as my phones now stuck in limbo
I recently got my hands on a samsung galaxy J500FN and long story short tried to flash a custom rom onto it using TWRP (and following this guide to the letter -http://ift.tt/1R0Sqkt )
I downloaded the TWRP app on the phone
then i downloaded onto the laptop as recommended in the above guide^ - Samsung Kies, TWRP recovery, Odin, Custom Rom (all downloads from the links in the guide)
so i got through steps 1 to 10 with no problem, its on 11 where i got lost
1. Download the rom and put it on your External SD Card ( make sure you have enough space).
2. Download this TWRP recovery: TWRP recovery by @aapav01 - more info about this recovery at CREDITS
You can also use TWRP 3.0 by Nick Verse which is fully working. Big thanks to him as well. If you didn't know yet, he also made a KERNEL for our J5
3. Download ODIN program. I'm using v3.09
4. Enable the OEM unlock bootloader option at developer options (if you can't see Developer Options, then go to Settings > About phone and tap 7 times build number).
5. Reboot your phone in download mode by keeping pressing Power button + home button + volume DOWN button at same time for few seconds. After an blue screen will appear, press volume up button.
6. Connect your phone with usb cable to your PC.
7. Open ODIN program and an number should appear at ID:COM. If it doesn't, then make sure that the phone usb drivers are installed.
8. Click on AP or PDA ( according to the version of odin which you downloaded) and choose the TWRP recovery you've downloaded and click START. Wait until the process finish.
9. Now go to TWRP recovery by keeping pressing Power button + home button + volume UP button at same time for few seconds.
10. Choose Wipe, then Advanced wipe and choose Dalvik Cache, System, Data and Cache and then Swipe to wipe.
11. Now choose Install and go to the place where you did put the ROM and choose it. Wait till installation finish and DON'T REBOOT YET.
12. Flash GAPPS. I use Open Gapps, ARM 5.1.1 pico version. http://opengapps.org/ . It's XDA thread is HERE .
13. Wipe dalvk cache & cache.
14. Reboot & WAIT 5-10 minutes until it boot!. Only first boot is longer. NOTE: When you reboot, if it ask you for SuperSU choose "do not install".
15. If you followed all the steps carefully, then everything will be OK. Enjoy
When i find the Rom and press the install button on TWRP it just changes from "install zip" to "install image" and i cant go any further.?
please help as my phones now stuck in limbo
from xda-developers http://ift.tt/2axabbq
via IFTTT
No comments:
Post a Comment